Just noticed some damage on the workshop I am building.
The wall that took the brunt of the storm started to cave in from the winds.
It's kind of hard to see, but the 2x4 double top plate above the window in the middle of the photo should obviously be stacked, not pushed in and shifted.
If the 100+mph winds had lasted another 10 seconds, we may have lost most of our roof and the workshop may have been messed up pretty bad.
I was able to sledgehammer the wall back so it's almost plumb...but it's still caving in a bit...about 1/2 inch. Gonna work on it some more tomorrow, get it plumb, then reinforce the walls with some angled 2x4 braces and secure it all back down with screws so it should fare better in the next 100+ mph wind storm.
Pain in the ass.